02-06-2013, 07:56 PM
(01-31-2013, 11:48 PM)Hawkeye Wrote: ... and find a good place for the 3-ton arbor press on the bench. I really need a bigger shop.
Hawkeye
Start by covering in under the deck at the back and that will expand the footage of the shop. If memory serves me right that was 8 ft x 20 ft. Then move the laundry room upstairs, you can't get at the machines anyways so that will open that side of the room up to make it more useable, and you still had a room that was unused at the bottom of the stairs behind the laundry room, so take over that as well! See you have lots of room LOL
Oh and then too much stuff stored in the garage, so that cuts down on your shop space.
With a bit of organizing you could over double your shop space.
I know, the pot calling the kettle black! As my kids moved out, their rooms were quickly taken over to increase shop space, added benefit was that kids could not move back in as no rooms left.
Walter
starlight_tools, proud to be a member of Metalworking Forum since Apr 2012.