02-04-2013, 06:55 PM
Kind of a dumb question probably, but how do people "restore" the finish on their equipment I D tags? Im certain there are methods, I just dont know about them
and would like to. The tag on my Johnson Model B was somewhat battered, so I (Im ducking for cover now) filled in the black areas with black sharpie
, it doesnt look as bad as it sounds, especially from 25 feet away. It has raised letters that I cleaned up with fine grit paper first, then filled in the black area the best I could.....crude, yes......
So, is the normal method screen printing or something, or scanning it on a computer somehow??
and would like to. The tag on my Johnson Model B was somewhat battered, so I (Im ducking for cover now) filled in the black areas with black sharpie, it doesnt look as bad as it sounds, especially from 25 feet away. It has raised letters that I cleaned up with fine grit paper first, then filled in the black area the best I could.....crude, yes......So, is the normal method screen printing or something, or scanning it on a computer somehow??
monkers, proud to be a member of MetalworkingFun since Nov 2012.