01-23-2013, 08:35 PM
Have the scales mounted. Need to make some sort of mount for the readouts.
![[Image: IMG_0434.jpg]](https://lh4.googleusercontent.com/-lulRaMmjfwQ/UQCNeyAgyQI/AAAAAAAABAc/kmYU5fOrK3Q/s1280/IMG_0434.jpg)
![[Image: IMG_0435.jpg]](https://lh3.googleusercontent.com/-e79BdKGCxoM/UQCNfCPe5qI/AAAAAAAABAU/G7vFSp0EO6c/s1280/IMG_0435.jpg)
Need to check the accuracy of the scales now. The table is out .013 in 6 inches comparing the scale to the dial, but agrees exactly to a dial indicator in 1/2 inch travel. Not sure if its the scale or the lead screw. Will set up a dial calliper and compare over the 10 or 12 inch of table movement.
Need to check the accuracy of the scales now. The table is out .013 in 6 inches comparing the scale to the dial, but agrees exactly to a dial indicator in 1/2 inch travel. Not sure if its the scale or the lead screw. Will set up a dial calliper and compare over the 10 or 12 inch of table movement.
Free advice is worth exactly what you payed for it.
Greg
Greg