01-03-2013, 09:26 PM
It's time to upgrade the 8520. I want to start back on the P&W 1830 Radial and need more height. I am going to fabricate and install a 4" Riser Block to extend the spindle to table distance from 15 3/8" to 19 3/8". Here is the preliminary print.
Material -- Center tube DOM 1020 6.5 OD X 5.250 ID X 3.0 long. Upper and lower flanges 1018 7.250 OD X 1.0 long
"Billy G"
Material -- Center tube DOM 1020 6.5 OD X 5.250 ID X 3.0 long. Upper and lower flanges 1018 7.250 OD X 1.0 long
"Billy G"