12-26-2012, 08:25 AM
here is a photo of he razor in a semi finished state, there are things that I'm not happy with like how the material bends but not a lot I can do about that besides hang some clothes pins on it and try with time and some warm, ok hot water to get the end to bend together and learn how to set the rivets properly to achieve proper tension on the blade.
I also need to get a cloth buff so I can bring up the shine in the scales which should make the texture between the glass fibers and resin pop.
the black scale in the bottom of the photo is what was on the blade to start with, the other side was broken at the hinge hole so it was hard to do any thing like hone or strop it without it wanting to flop around in your hand.
![[Image: razor002_zps05235e8e.jpg]](http://i1222.photobucket.com/albums/dd484/Superdave257/razor002_zps05235e8e.jpg)
DA
I also need to get a cloth buff so I can bring up the shine in the scales which should make the texture between the glass fibers and resin pop.
the black scale in the bottom of the photo is what was on the blade to start with, the other side was broken at the hinge hole so it was hard to do any thing like hone or strop it without it wanting to flop around in your hand.
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!