12-22-2012, 03:10 AM
Dave
The 80 is mounted on the rear end of the spindle to index the chuck. Divide 80/32 = 2 -1/2
index every 2-1/2 teeth on the 80 gear and cut 32 teeth on the new gear.
Now you know why a book is going to be required at the end of all this.
Brian.
The 80 is mounted on the rear end of the spindle to index the chuck. Divide 80/32 = 2 -1/2
index every 2-1/2 teeth on the 80 gear and cut 32 teeth on the new gear.
Now you know why a book is going to be required at the end of all this.
Brian.
