HI been meaning to make one of these for a long time so I made this today.
I started with a cheap 13MM socket. I then cut off the driving end with a cutting disc in my Dremel. I then dressed up the socket end. I then got a piece of 8MM rod then split one end to go around the socket. I then lifted the end of the rod by 8MM then i silver soldered the socket to the splayed end. Dressed it all up, put some heat shrink on the handle then painted the socket end red. right pics
I started with a cheap 13MM socket. I then cut off the driving end with a cutting disc in my Dremel. I then dressed up the socket end. I then got a piece of 8MM rod then split one end to go around the socket. I then lifted the end of the rod by 8MM then i silver soldered the socket to the splayed end. Dressed it all up, put some heat shrink on the handle then painted the socket end red. right pics
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.