more stuff

[monkers]

Here are some more things Ive made.
Parts washer, I had a shop brake the 16ga sheet metal "tub" and also the top. They sheared the end caps and I welded it together about 15 years ago. It has a pump in the tub with a manifold I made so you can use just the straight fluid, or one with fluid going through a brush. I used Loc Line for the line from the manifold. It also has a spin on filter to help keep the fluid clean, filter is from Napa and I think it is a diesel truck fuel filter if I remember right.

New base for my Craftsman drill press, made of 2"x3"x 3/16" tube with 1" flat stock on the top, two pieces welder together and ground smooth. Its what I had lying around so thats why I used it lol.


Next is a stock rack, also made about 15 years ago. I have 3 more sections that are in storage with the rest of my equipment. After the divorce I am finally starting to be able to work again. I have a small shop that I rent, so room is tight. Hopefully soon I can bring some more of my equipment down.

Hanger for the creeper