11-16-2012, 09:41 PM
(This post was last modified: 11-16-2012, 10:26 PM by the penguin.)
I seem to be milling objects that are very irregular shaped, causing clamping issues on the mill table. I ended up a while back making adapter plates that bolt to the table that allow, a much wider option for clamping. The plates are 1/2" thick one of them is 16" by 16" and the other is 12" x 12", the bigger one has 1/2"-13 threaded holes and the smaller one has both 1/2"-13 and 3/8"-16 threaded holes.
jack