09-27-2012, 08:18 PM
Hello Claude,
Your logic is pretty sound, but I will need to check the math, and if you could clarify are you using the blocks the space the rotation off of one pin hole> if so your block height will need to make an isosceles triangle with the centre of rotation being the peak and the two equal angles will be the primary location pin and the moving pin.
I know how hard it would be to make sense of that text, so, give me a day and I'll come back to you with a better description/picture and or a better method.
Best Regards
Rick
Your logic is pretty sound, but I will need to check the math, and if you could clarify are you using the blocks the space the rotation off of one pin hole> if so your block height will need to make an isosceles triangle with the centre of rotation being the peak and the two equal angles will be the primary location pin and the moving pin.
I know how hard it would be to make sense of that text, so, give me a day and I'll come back to you with a better description/picture and or a better method.
Best Regards
Rick
Whatever it is, do it today, Tomorrow may not be an option and regret outlasts fatigue.