I managed to press the hub out of the bevel gear. On inspection, the hub was stuck due to the bur that had been caused by the clutch slipping. After I removed the burr, the hub was able to be pressed and and out by hand. Now all I need to do is get some gear oil and test it.
An ultrasonic cleaner is great for this sort of thing. This belongs to a mate but conveniently lives in my workshop :)
Wear from the balls:
A few pics of the gear and hub:
Back together and ready to be pressed back on the shaft:
An ultrasonic cleaner is great for this sort of thing. This belongs to a mate but conveniently lives in my workshop :)
Wear from the balls:
A few pics of the gear and hub:
Back together and ready to be pressed back on the shaft:
Hunting American dentists since 2015.