DTI refurb No 2 and a bit

[krv3000]

hi well this one is a bit more in depth and its the plunger type this one is from work all thou in good order the plunger was sticking first thing is to remove the indicators this shod a law for the lens to cum out brush the Daile with a good soft brush i use a old shaving brush remove any durt and dust the 4 fixing screws that hold the front on to get to the Daile itself i use Lolly pop sticks to remove the needle then remove the 4 screws holding on the back and remove the dust shield you will gnaw see the movement remove the two screws from the front and the movement will cum out right pics