Latest Delivery
#21
I won't separate mine, box or no box I WILL lose one or more.

I've never seen the really small ones you have that look like they're brass. Where'd you get 'em and how small do they go?
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#22
(10-28-2022, 03:59 PM)Highpower Wrote: Latest delivery came in the mail today. I have had four strings of these "Thread Detective" sizing tools for some time now.



While they are great for checking the size of loose fasteners that you can easily spin into or over one of the gages, they are quite a pain to use for checking the threads of fasteners already mounted on a piece of equipment that can't be removed. Studs or nuts welded to a frame for example. You have to try to line up the threads and spin the entire cable full of gages round and round while it flops all over the place. Even worse if you are working in tight quarters. I wanted to separate the gages so that they could be used individually but I didn't want to just throw them all together in a bag or a plain box where they would get all jumbled together and possibly damage the external threads.

I talked to the master of 3D printed tooling boxes about it and he generously designed and printed the perfect solution for me. Thanks again Ed.  Worthy  Smiley-eatdrink004

Happy to be of service.  Big Grin

Ed
Reply
Thanks given by: Highpower
#23
(10-28-2022, 05:44 PM)Vinny Wrote: I won't separate mine, box or no box I WILL lose one or more.  

I've never seen the really small ones you have that look like they're brass.  Where'd you get 'em and how small do they go?

The poor lighting in my picture makes the smallest sizes ("mini") look that way but they are actually nickle plated. But they probably are made from brass since they are non-magnetic. The larger sizes ("standard") seem to be chrome plated and they are definitely magnetic. I'm pretty sure I bought all of them from Amazon. Here are the sizes in the "mini" sets:

   
Willie
Reply
Thanks given by:
#24
I have those too, and right, they are a pain to use on anything but loose fasteners.
I like the box and may have to steal that idea. But now that I see there are smaller sizes too...I'll have to buy those first.
A good tight fit in the bores and your less likely to spill them all over the place when you open it.
Retired old guy finally living the dream and enjoying life to the fullest!!!
Reply
Thanks given by:
#25
(10-28-2022, 08:31 PM)rubes Wrote: I have those too, and right, they are a pain to use on anything but loose fasteners.
I like the box and may have to steal that idea. But now that I see there are smaller sizes too...I'll have to buy those first.
A good tight fit in the bores and your less likely to spill them all over the place when you open it.

I can post the stl file if you'd like to 3d print the box.

Ed
Reply
Thanks given by:
#26
(10-28-2022, 09:30 PM)EdK Wrote:
(10-28-2022, 08:31 PM)rubes Wrote: I have those too, and right, they are a pain to use on anything but loose fasteners.
I like the box and may have to steal that idea. But now that I see there are smaller sizes too...I'll have to buy those first.
A good tight fit in the bores and your less likely to spill them all over the place when you open it.

I can post the stl file if you'd like to 3d print the box.

Ed

Thanx Ed...is that box less than 8.5" wide? if not I would have to reconfigure it anyway to fit my printer bed. that's not a bad thing since I love the CAD part of designing.
Retired old guy finally living the dream and enjoying life to the fullest!!!
Reply
Thanks given by:
#27
(10-28-2022, 09:30 PM)EdK Wrote:
(10-28-2022, 08:31 PM)rubes Wrote: I have those too, and right, they are a pain to use on anything but loose fasteners.
I like the box and may have to steal that idea. But now that I see there are smaller sizes too...I'll have to buy those first.
A good tight fit in the bores and your less likely to spill them all over the place when you open it.

I can post the stl file if you'd like to 3d print the box.

Ed

Yes please.
Reply
Thanks given by:
#28
(10-28-2022, 08:31 PM)rubes Wrote: A good tight fit in the bores and your less likely to spill them all over the place when you open it.

I can tell you that bore sizes on the box I got from Ed are spot on. I only had one gage out of the bunch that didn't slide all the way down into the hole. And that was due to a very small burr sticking out from from the cross hole that is drilled through the gage for the wire cable to hold them. Some gentle strokes with a needle file to remove the burr (.001" - .002") and the gage slid right in. That's how close they fit. Thumbsup

One thing I will mention is that the SAE and Metric labels should be reversed. But that is my fault that I didn't catch it earlier. When I sent the hole sizes I needed to Ed, I obviously marked the groups incorrectly. Smiley-signs140

But I printed some new stick on vinyl labels to put over them and all is good.
Willie
Reply
Thanks given by:
#29
(10-29-2022, 03:27 PM)Highpower Wrote: I can tell you that bore sizes on the box I got from Ed are spot on.

Wouldn't have expected any less from Master Ed (not Mr Ed Big Grin )
Reply
Thanks given by: EdK
#30
(10-29-2022, 12:50 AM)rubes Wrote:
(10-28-2022, 09:30 PM)EdK Wrote:
(10-28-2022, 08:31 PM)rubes Wrote: I have those too, and right, they are a pain to use on anything but loose fasteners.
I like the box and may have to steal that idea. But now that I see there are smaller sizes too...I'll have to buy those first.
A good tight fit in the bores and your less likely to spill them all over the place when you open it.

I can post the stl file if you'd like to 3d print the box.

Ed

Thanx Ed...is that box less than 8.5" wide? if not I would have to reconfigure it anyway to fit my printer bed. that's not a bad thing since I love the CAD part of designing.

Sorry, it's 9" x 3.375". I also had to reconfigure it after I realized I drew it up in CAD too wide to fit my printer bed. Bash

Ed
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)