Commercial 3D printer businesses?
#51
(03-05-2022, 11:48 AM)Highpower Wrote: Just don't delete it! Big Grin

I marked it as "junk" and just when I was about to log out of my email, something told me to check it. It wasn't necessary but thanks!

Ed
Reply
Thanks given by:
#52
Unfortunately Willy the print doesn't always resemble to drawing. Sometimes the drawing is beyond the capabilities of the printer and other times the slicer settings are not correct and/or the printer hasn't been dialled in properly.

It is similar to giving a blueprint to three different machinists with different skill levels and different machines.
Hunting American dentists since 2015.
Reply
Thanks given by:
#53
(03-06-2022, 05:36 AM)Mayhem Wrote: Unfortunately Willy the print doesn't always resemble to drawing.  Sometimes the drawing is beyond the capabilities of the printer and other times the slicer settings are not correct and/or the printer hasn't been dialled in properly.

And this applies to a Selective Laser Sintering machine costing between $20K and $500K as well? They talk about it being the best process for fine details. 17428

This part wasn't done on a printer using an extruded filament. I have to wonder if it would have come out better if it had been. Chin

Oh well, it is what it is. It's my first experience with 3D printed parts so I didn't know what to expect anyway. Smiley-signs024
Willie
Reply
Thanks given by:
#54
(03-06-2022, 12:30 PM)Highpower Wrote: And this applies to a Selective Laser Sintering machine costing between $20K and $500K as well? They talk about it being the best process for fine details.  17428

This part wasn't done on a printer using an extruded filament. I have to wonder if it would have come out better if it had been. Chin

Oh well, it is what it is. It's my first experience with 3D printed parts so I didn't know what to expect anyway.  Smiley-signs024

Do you have the file for that part that you could post? I could print it and see if I get better results than you got from the place that did it for you.

Ed
Reply
Thanks given by:
#55
Ed, I do have a couple of different files for it yes, but I have no idea of what the difference(s) are between them. MikeWi said here that using a .3mf file would remove any problems with dimensions so that is what I sent to Xometry to make the part from. I didn't want to bother you by asking because I know you said you were still working out doing 3D lettering for your own boxes.


.pdf   Tormek USB-GrindingWheel Ruler Drawing v3.pdf (Size: 147.19 KB / Downloads: 2)

.stl   Tormek-USB-GrindingWheel-Ruler.stl (Size: 838.56 KB / Downloads: 2)

I also have a couple of .3mf files but it looks like that file type is not allowed here as an upload.

Edit: Additional info...

Quote:Printed with PETG, 0,2 layer height, 25% infill
The attached 3mf files is sliced with Prusaslicer for Prusament PETG, Prusa I3Mk3S+
Color change at 4,2mm height
One have “Height Range Modifiers” to tune the final result.
Have no idea how other slicers handle PS's “Height Range Modifiers”
And one without height modifiers

I'm getting the feeling I should have sent them the other .3mf file ~ the one with “Height Range Modifiers”.
Since I have no clue what that means, I sent them the one without height modifiers.
Bash
Willie
Reply
Thanks given by:
#56
(03-06-2022, 02:16 PM)Highpower Wrote: I didn't want to bother you by asking because I know you said you were still working out doing 3D lettering for your own boxes.

If it's in the stl file then I can print it. I just don't know how to create the lettering in the 3D model yet.
Alas, that part is too big for my printer to print.

(03-06-2022, 02:16 PM)Highpower Wrote: I also have a couple of .3mf files but it looks like that file type is not allowed here as an upload.

It is now.  Big Grin

Ed
Reply
Thanks given by:
#57
(03-06-2022, 03:18 PM)EdK Wrote:
(03-06-2022, 02:16 PM)Highpower Wrote: I didn't want to bother you by asking because I know you said you were still working out doing 3D lettering for your own boxes.

If it's in the stl file then I can print it. I just don't know how to create the lettering in the 3D model yet.
Alas, that part is too big for my printer to print.

(03-06-2022, 02:16 PM)Highpower Wrote: I also have a couple of .3mf files but it looks like that file type is not allowed here as an upload.

It is now.  Big Grin

Ed

Amazing how that works.   Thumbsup   Big Grin


.3mf   Tormek-USB-GrindingWheel-Ruler.3mf (Size: 232.56 KB / Downloads: 2)

.3mf   Tormek-USB-GrindingWheel-Ruler-HeightModifier.3mf (Size: 232.96 KB / Downloads: 1)
Willie
Reply
Thanks given by:
#58
I opened both files in PrusaSlicer and they look the same to me. I'll try printing both using PLA and see what happens.
Oh, and the part fits if put diagonally. PrusaSlicer did that on its own.

Ed
Reply
Thanks given by:
#59
(03-06-2022, 04:28 PM)EdK Wrote: Oh, and the part fits if put diagonally. PrusaSlicer did that on its own.

Ed

My bad Ed. What I meant was, instead of putting it into a longer box for shipping Xometry stuffed it into a smaller box diagonally between corners of the box. I think they had to bend it a bit to get it to fit in the box. That's why I'm hoping it might straighten itself out again when I attempt to dye it a darker color to make it more readable than white on white.

From what I gathered the file with "modifiers" has adjustable settings or constants available in the software? I don't know. Blush
Willie
Reply
Thanks given by:
#60
(03-06-2022, 04:41 PM)Highpower Wrote: What I meant was, instead of putting it into a longer box for shipping Xometry stuffed it into a smaller box diagonally between corners of the box.
Yup, I understand that. What I was referring to was when I loaded the stl file into PrucaSlicer it did not place it diagonally so it wouldn't fit the printer bed. I never even thought of trying to rotate it to see if it would fit diagonally. But when I loaded the 3mf file into PrusaSlicer it put it diagonally on the printer bed so it fit. Not sure why it placed it differently between the two file types.

Ed
Reply
Thanks given by:




Users browsing this thread: 8 Guest(s)