12-02-2018, 12:11 PM
In introductions Pete O said "Oh, and it's considered impolite here to use phrases like 'shop built shaper' and then not attach pictures. " What, a welcome, being called impolite , . I'm an old phart with very few computer skills, I still look for the keys, for heaven's sake.
I'll try to describe it as best I can and how I came into it. I got a lead on some high end wood working chisels so I checked it out. I was a pattern maker's tool chest from an estate sale with E.A. Berg and Wm. Marple & Sons chisels and in channel gouges. Swedish and English chisels, it simply doesn't get better. After some bargaining, I'll be bargaining with St. Peter at the Pearly Gates, we agreed to $275. "Ray what this?" "Oh that's a baby shaper" "A what? " "It removes metal" "OK for $50 more you can have it" "Yeah, I guess so" Another project, I was bursting out with enthusiasm, NOT.
It's a 6" shop built of welded steel. From the 1 5/8" x 3 5/8" 2x4s in the stand, it predates the late '60s. The Tamper brand motor looks very '50ish. I live near Vancouver, at one time Vancouver had more sawmills than any place else in the world. Each one of these mills would have a fairly complete maintenance shop with lathe, mill and forge. The square head bolts used on the stand would suggest sawmill timber construction. Early in my career, in between construction jobs, I worked as a relief millwright in a lot of the ones that remained. I'm not fond of graveyard, so I always turned down steady work. My guess ,it was made in one of those shops.
The specs are 7" or so stroke, three speeds with clutch, gear driven, square ways on the ram.
This is more of a completion than a rebuild.
shimmed the ram
I have modified the motor and jackshaft plates for easier adjustment.
Added a hand wheel for manual positioning .
Originally it used one of the old style ratcheting box end wrenches for the feed ratchet, I switched it out with a fine tooth ratchet and adjustable feed rod.
Painted it
To do
add feed dials with rods that have easy pitch, 7/16" x20 tpi and acme 1/2" x 10 tpi
complete the skate assembly.
I'll try to describe it as best I can and how I came into it. I got a lead on some high end wood working chisels so I checked it out. I was a pattern maker's tool chest from an estate sale with E.A. Berg and Wm. Marple & Sons chisels and in channel gouges. Swedish and English chisels, it simply doesn't get better. After some bargaining, I'll be bargaining with St. Peter at the Pearly Gates, we agreed to $275. "Ray what this?" "Oh that's a baby shaper" "A what? " "It removes metal" "OK for $50 more you can have it" "Yeah, I guess so" Another project, I was bursting out with enthusiasm, NOT.
It's a 6" shop built of welded steel. From the 1 5/8" x 3 5/8" 2x4s in the stand, it predates the late '60s. The Tamper brand motor looks very '50ish. I live near Vancouver, at one time Vancouver had more sawmills than any place else in the world. Each one of these mills would have a fairly complete maintenance shop with lathe, mill and forge. The square head bolts used on the stand would suggest sawmill timber construction. Early in my career, in between construction jobs, I worked as a relief millwright in a lot of the ones that remained. I'm not fond of graveyard, so I always turned down steady work. My guess ,it was made in one of those shops.
The specs are 7" or so stroke, three speeds with clutch, gear driven, square ways on the ram.
This is more of a completion than a rebuild.
shimmed the ram
I have modified the motor and jackshaft plates for easier adjustment.
Added a hand wheel for manual positioning .
Originally it used one of the old style ratcheting box end wrenches for the feed ratchet, I switched it out with a fine tooth ratchet and adjustable feed rod.
Painted it
To do
add feed dials with rods that have easy pitch, 7/16" x20 tpi and acme 1/2" x 10 tpi
complete the skate assembly.