Looking At A Bigger Mill
#21
(05-01-2015, 04:16 PM)f350ca Wrote: Variable speed is nice if you can swing it Ed.

Greg,

I plan on putting a VFD on the mill if it doesn't come with variable speed so either way I won't be without it. It's a must in my book. The first modification I did to my Enco mill was to replace the motor with a 3-phase  and added a VFD. I'm spoiled now. Happyyes
I'd actually prefer going the VFD route since it seems like you can get a better range of speeds vs the mechanical variable speeds.

Ed
Reply
Thanks given by:
#22
(05-01-2015, 04:41 PM)Vinny Wrote: You don't have a forklift Ed?  huh..  I thought everyone did.

Vinny,

I do have one of sorts. It's my hand and arm. I lift the fork from the plate to my mouth, numerous times (usually too many). Big Grin

Ed
Reply
Thanks given by:
#23
(05-01-2015, 01:30 PM)EdK Wrote: and must have a fork lift for unloading. Not going to happen.

Forklift - schmorklift.....

They had a tow truck/wrecker come out and lift my mill out of the semi-trailer while it was still bolted to the shipping pallet. 
You see that snazzy lifting eye hook on top of the ram? Big Grin

I paid $60 for a "curbside" delivery with a lift gate equipped trailer. Of course the shipping company ignored that and it showed up on a standard 40 foot trailer. So they got to pay for the wrecker service.

The driver was nice enough to back it up into my driveway and set it at the back of the house for me. That is where it started coming apart one piece at a time like Darren sez.   Cool
Willie
Reply
Thanks given by:
#24
I live out in a small town where those types of resources are not available at the drop of a hat so I need to plan ahead. The person from Eisen told me I'd need a forklift to unload it from the flat-bed truck it gets delivered on. I'm surprised they would send a full sized mill from California to Minnesota on a flat-bed  truck. 17428

Ed
Reply
Thanks given by:
#25
If you want, Ed, you can borrow mine. Just come and get it. :) You'll also need to return it, my trailer is full right now.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#26
(05-01-2015, 10:28 AM)EdK Wrote:
(05-01-2015, 06:49 AM)stevec Wrote: Ed, if 935 means 9" x 35" the PM mill has 14" less travel than the Griz.
Might be a deal breaker for me. Chin

Steve

Smiley-eatdrink004

I'm not sure where you got your information from Steve but the Grizzly has an X travel of 29" and the PM has an X travel of 24". That doesn't add up to a 14" travel difference.  17428

I'm guessing you assumed the table sizes correlated to X travel distances (49 - 35 = 14). It's certainly a logical conclusion though.
The Y travel is the same on both at 12".

Ed

Ed , I did say "if" 935 means 9 x 35 etc.
How much is the travel distance difference? Not that it matters now. Blush

Worthy

Steve

Smiley-eatdrink004
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#27
9x35, 10x42 doesn't always (read: rarely) means what the travel is. It's usually just the table size.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#28
(05-01-2015, 06:30 PM)stevec Wrote:
(05-01-2015, 10:28 AM)EdK Wrote: I'm not sure where you got your information from Steve but the Grizzly has an X travel of 29" and the PM has an X travel of 24". That doesn't add up to a 14" travel difference.  17428

I'm guessing you assumed the table sizes correlated to X travel distances (49 - 35 = 14). It's certainly a logical conclusion though.
The Y travel is the same on both at 12".

Ed

Ed , I did say "if" 935 means 9 x 35 etc.
How much is the travel distance difference? Not that it matters now. Blush

Worthy

Steve

Smiley-eatdrink004

It does mean 9 x 35, but the table size not the travel. Just like a Bridgeport mill is described as a 9 x 42 or 9 x 49. That's not the travel but the table size.
Per my statement above "the Grizzly has an X travel of 29" and the PM has an X travel of 24" so the difference is 5".

No worries, all is good.  Smile

Ed
Reply
Thanks given by:
#29
Those numbers are from the marketing dept. Always use the larger numbers, they look better.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#30
Buy whatever you feel you can safely move into it's home, Ed. Nearly any of them those mentioned would be 10x better than the one you've been struggling with.

Me, I'd rather disassemble/reassemble a bigger and better machine that one time than compromise forever or find myself doing it a second time.
Reply
Thanks given by:




Users browsing this thread: 9 Guest(s)