+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Welding & Casting (http://www.metalworkingfun.com/forum-9.html)
+--- Thread: Tanks alot !!!!!!! (/thread-856.html)
Pages:
1
2
Tanks alot !!!!!!! - aametalmaster - 09-21-2012
On some forums guys ask to "see your welds". Well some welds are never seen because they get ground off like most of mine do. Here is a radiator tank i made today that holds 55 and 88 gallons. It has a baffle plate. It will be used on a 4,700 HP Cat engine. I make 2 to 4 of these a week depending on the orders. Made from 20" black pipe and welded solid plus pressure checked on both sides. The fit up in the first pic then the weld. Then it is all ground smooth. And a couple pics of the fittings. Welded with a Miller 252 with .045 gas flux core wire and CO2. They must have zero flaws both inside and out. Enjoy...Bob
RE: Tanks alot !!!!!!! - doubleboost - 09-21-2012
Very Nice
John
RE: Tanks alot !!!!!!! - EdK - 09-21-2012
Very impressive Bob! I didn't know they made black pipe that large.
Ed
RE: Tanks alot !!!!!!! - aametalmaster - 09-21-2012
(09-21-2012, 06:23 PM)EdK Wrote: Very impressive Bob! I didn't know they made black pipe that large.
Ed
The shop next to me makes higher pressure tanks and some are 30" in dia and 1" thick...Bob
RE: Tanks alot !!!!!!! - EdK - 09-21-2012
(09-21-2012, 06:25 PM)aametalmaster Wrote:(09-21-2012, 06:23 PM)EdK Wrote: Very impressive Bob! I didn't know they made black pipe that large.
Ed
The shop next to me makes higher pressure tanks and some are 30" in dia and 1" thick...Bob
That stuff must cost an arm and a leg!
Ed
RE: Tanks alot !!!!!!! - aametalmaster - 09-21-2012
Yes some tanks are 30 grand...Bob
RE: Tanks alot !!!!!!! - TOM REED - 09-21-2012
Some even want the family jewels plus an arm and a leg. Very nice work beyond the comprehension of many. tom
RE: Tanks alot !!!!!!! - aametalmaster - 09-21-2012
The 7th pic which is the baffle plate has 5 passes of weld around it. It is also 24" in so thats a lot of welding at arms reach. Thats why the seam because the baffle is supossed to be in 40" but i can't reach that far so i cut the pipe and spliced it back together where the side couplings are. Figured i would save some grinding :) ...Bob
RE: Tanks alot !!!!!!! - DanH - 09-21-2012
That's at the industrial end of welding! Great work, thanks for sharing.
RE: Tanks alot !!!!!!! - DaveH - 09-22-2012
Hi Bob,
Very impressive
nicely photographed 
Thanks for sharing
DaveH