+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machinery (http://www.metalworkingfun.com/forum-10.html)
+--- Forum: Milling Machines (http://www.metalworkingfun.com/forum-12.html)
+--- Thread: X Axis Power Feed for Mill Drill (/thread-4361.html)
X Axis Power Feed for Mill Drill - Cross Slide - 11-14-2021
I would like to get a X Axis Power Feed for my Mill Drill. But I’m not sure which one would work with my style of milling machine. I have a Craftex B1977 MD-30B. I have seen several videos with mill drills of other makes that pretty much look the same. Grizzly, King Canada, RF, etc. I’m hoping there is someone has a mill drill of this style that has installed a power feed that would know which one would fit my mill.
[attachment=17352]
[attachment=17350]
[attachment=17351]
Trevor