+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: How-To's (http://www.metalworkingfun.com/forum-8.html)
+--- Thread: Make your own ingot molds. (/thread-4281.html)
Make your own ingot molds. - Patrick-C - 02-10-2021
I just made myself a pair of ingot molds for aluminum, brass, and copper. I made one using a welder and the other I bolted together.
Patrick
RE: Make your own ingot molds. - Dr Stan - 02-10-2021
Typically I used 3 or 4 inch wide by 6 to 8 inch long drops of channel iron. Welded a piece on each end and called it good. The taper on the inside of the channel made it easy to remove the ingots.
RE: Make your own ingot molds. - Patrick-C - 02-16-2021
I just tested those molds out and they worked great. My youtube channel turned 1 today as well.
This next year is going to be nothing but better for my channel.
Patrick
RE: Make your own ingot molds. - FlingZ - 11-08-2021
Nice video. I thought only Grumpy Old Men ( GOM) were on the forum. Keep making those vdios. Thank you
RE: Make your own ingot molds. - Dr Stan - 11-08-2021
Hey, I resemble that remark.
RE: Make your own ingot molds. - FlingZ - 07-10-2022
(11-08-2021, 09:29 AM)Dr Stan Wrote: Hey, I resemble that remark.
Just joking Doc