Asong AS-235 power feed?? - Printable Version

Asong AS-235 power feed?? - Printable Version

+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: General Metalworking Discussion (http://www.metalworkingfun.com/forum-6.html)
+--- Thread: Asong AS-235 power feed?? (/thread-1336.html)

Pages: 1 2 3

Asong AS-235 power feed?? - monkers - 04-25-2013

Curious if anyone has any info on a Asong AS-235 power feed for a mill drill. Im looking for a parts and owners manual, and a source for parts. Im gonna start goggling in a minute, but I thought Id ask first for some first hand experience. There seems to be something funky going on in there, when you move the lever to change direction, it doesnt seem to work right. Feels like something is stripped or something. It will move to the right (the table) but when trying to go left the motor turns but it doesnt seem to engage. The lever movement is rough, feels like there are indents for left right and neutral, but they seem to "move".....hard to explain. Want a drawing before I take it apart.

RE: Asong AS-235 power feed?? - henryarnold - 04-25-2013

(04-25-2013, 08:49 PM)monkers Wrote: Curious if anyone has any info on a Asong AS-235 power feed for a mill drill. Im looking for a parts and owners manual, and a source for parts. Im gonna start goggling in a minute, but I thought Id ask first for some first hand experience. There seems to be something funky going on in there, when you move the lever to change direction, it doesnt seem to work right. Feels like something is stripped or something. It will move to the right (the table) but when trying to go left the motor turns but it doesnt seem to engage. The lever movement is rough, feels like there are indents for left right and neutral, but they seem to "move".....hard to explain. Want a drawing before I take it apart.

I have an Asong AS-235. I have had it apart. Not surprisingly it is made cheaply. Mine has always been on the noisy side and particularly in one direction. I vaguely remember that one or more of the gears are made from plastic. You may have a partially stripped gear. Its been 3 years since I had mine apart but I think you have to peel the label around the controls off to split the case. Next time around, I'll spend a little more for hopefully better quality. I guess I shouldn't complain. Mine still works.

Henry Arnold
[attachment=5108]

RE: Asong AS-235 power feed?? - Hawkeye - 04-25-2013

If you have to remove a label, use a hot air gun. Heat the label evenly. Keep the gun moving. If it's plastic, be careful not to melt it. When it's hot enough, if should peel off cleanly. I have removed paper labels from cardboard boxes and stuck them on new boxes with this method.

If there's any glue left, it can be removed with isopropyl alcohol.

RE: Asong AS-235 power feed?? - monkers - 04-25-2013

Lol, my label is cracked.....trying to have someone make up one on the computer for me, well see how that goes.....

RE: Asong AS-235 power feed?? - EdK - 04-26-2013

(04-25-2013, 08:49 PM)monkers Wrote: Curious if anyone has any info on a Asong AS-235 power feed for a mill drill. Im looking for a parts and owners manual, and a source for parts. Im gonna start goggling in a minute, but I thought Id ask first for some first hand experience. There seems to be something funky going on in there, when you move the lever to change direction, it doesnt seem to work right. Feels like something is stripped or something. It will move to the right (the table) but when trying to go left the motor turns but it doesnt seem to engage. The lever movement is rough, feels like there are indents for left right and neutral, but they seem to "move".....hard to explain. Want a drawing before I take it apart.

Here you go.

http://www.bestlinepro.com/power-feed-parts.asp

Ed

RE: Asong AS-235 power feed?? - monkers - 04-26-2013

Edk, I emailed them about the cracked tag a while back to order a replacement, and I was told they sell Align parts, not Asong, and that the two were different. Wonder if the internals are the same

RE: Asong AS-235 power feed?? - EdK - 04-26-2013

(04-26-2013, 05:54 AM)monkers Wrote: Edk, I emailed them about the cracked tag a while back to order a replacement, and I was told they sell Align parts, not Asong, and that the two were different. Wonder if the internals are the same

The tags are probably different but I'll be the innards are the same.

Ed

RE: Asong AS-235 power feed?? - monkers - 04-26-2013

ok great, thank you

RE: Asong AS-235 power feed?? - Dave J - 04-27-2013

Hi,
I have been trying to post, but unable to, I will see if this works.

Dave

No the pictures wont work, will see Ed about them.

RE: Asong AS-235 power feed?? - Dave J - 04-27-2013

Hi,

Not sure if these photos will help out, I took my Y power feed apart last year and took some photos.
It was playing up half way through making my tool holders and it was stuttering, so I changed it over to the knee and it seems fine there.

[Image: Picture4699.jpg]

If you have any questions I will try to answer them.
Dave