The misadventures of a Wells-Index 860C

The misadventures of a Wells-Index 860C - Printable Version

+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machinery (http://www.metalworkingfun.com/forum-10.html)
+--- Forum: Milling Machines (http://www.metalworkingfun.com/forum-12.html)
+--- Thread: The misadventures of a Wells-Index 860C (/thread-421.html)

Pages: 1 2 3 4 5

RE: The misadventures of a Wells-Index 860C - ETC57 - 07-02-2012

Ron,

looks to me like you have the situation well under control.

I can't wight to see it making chips! Drool

Jerry.

RE: The misadventures of a Wells-Index 860C - ScrapMetal - 07-03-2012

(07-02-2012, 06:14 PM)TOM REED Wrote: Welding curtain would probably be an excellent idea, also would keep prying eyes from seeing what you are doing . tpm

The only prying eyes I need to worry about are the ones that look at the Visa bill every month but she wouldn't be real interested in just what I am doing with my toys. Big Grin

(07-02-2012, 10:11 PM)ETC57 Wrote: Ron,

looks to me like you have the situation well under control.

I can't wight to see it making chips!

Jerry.

Situation under control?? Wow, that would be another first. Tongue

Thanks guys. I'll be destroying metal as soon as I can get the vise clamped down and some oil in the correct spots. I think I have enough tooling to start making a little mayhem at least. Big Grin

-Ron

RE: The misadventures of a Wells-Index 860C - Mayhem - 07-03-2012

Don't forget the pics Ron! Also, Tom did a great video on indicating a vice on a mill, so no excuses there!!!

RE: The misadventures of a Wells-Index 860C - ScrapMetal - 07-03-2012

(07-03-2012, 07:15 AM)Mayhem Wrote: Don't forget the pics Ron! Also, Tom did a great video on indicating a vice on a mill, so no excuses there!!!

I guess I do have a video camera. Hmmm....

-Ron

RE: The misadventures of a Wells-Index 860C - ScrapMetal - 07-09-2012

Well, no video as of yet but I am recouping my cost for the machinery by making a replacement for a .05 cent piece of broken plastic for an old fishing rod/reel!

Tada! My first "milling" project -

[Image: reel001.JPG]

My son was on a Boy Scout camping trip and tool along an old fishing pole that was my wife's when she was a bit Rolleyes

younger. I'm still a little fuzzy on what exactly happened but it somehow involved a "large" fish (that got away :) ) and the plastic wedge that secures the reel to the rod breaking.

I still need to round the end, drill and tap the hole, and put a concave radius on the side that comes in contact with the reel.

Oh, and I've decided I don't like working with aluminum. Being completely ignorant I, at one point, tried to remove too much Al (at least with the end mill, speed, etc. that I had things set at) and it turned into butter and clogged up my end mill. Fortunately I was able to "chip" it back off. This unknownium aluminum (piece of scrap I "salvaged" out of a line filter) is soft! Big Grin

I've got a good idea of how I'll finish this piece and I'll post the process.

Now I'm "dangerous" Rotfl

-Ron

RE: The misadventures of a Wells-Index 860C - ETC57 - 07-09-2012

You animal Ron, Rotfl

Jerry.

RE: The misadventures of a Wells-Index 860C - DaveH - 07-10-2012

Ron,
They break it, you mend it Rotfl

Nice bit of milling

DaveH

RE: The misadventures of a Wells-Index 860C - Mayhem - 07-10-2012

How many flutes does the end mill have that you used Ron? Two flute end mills are best suited to aluminium, as these provide better chip control and are less likely to choke up.

RE: The misadventures of a Wells-Index 860C - ScrapMetal - 07-10-2012

(07-09-2012, 09:50 PM)ETC57 Wrote: You animal Ron,

Jerry.

I'm excited! At this rate I may make back my "investment" Tongue

by the next millenium. Woo hoo! My wife will be so proud. Big Grin

(07-10-2012, 02:49 AM)DaveH Wrote: Ron,
They break it, you mend it

Nice bit of milling

DaveH

Thanks. That's pretty much how my life works. I come home each night to see what "new" project I have sitting on my counter to repair. Slaphead

(07-10-2012, 07:40 AM)Mayhem Wrote: How many flutes does the end mill have that you used Ron? Two flute end mills are best suited to aluminium, as these provide better chip control and are less likely to choke up.

Yeah, I know that using a 4-flute wasn't "optimal" but it's all I had on hand. I'm hoping that it will just be a matter of time until I get a better "feel" for what combination of depth of cut, feed rate, rpm, and end mill type is appropriate for a particular material and cut. I've looked at all the charts until I'm cross-eyed so now it's a matter of starting to apply it.

"A man's got to know his (tools') limitations." - D. Harry

-Ron

RE: The misadventures of a Wells-Index 860C - doubleboost - 07-10-2012

Hi
Ron
Well done on getting your mill running Thumbsup

You will be able to do some serious metal removal with that beast Drool

John