+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machinery (http://www.metalworkingfun.com/forum-10.html)
+--- Forum: Milling Machines (http://www.metalworkingfun.com/forum-12.html)
+--- Thread: Degree Finder or DRO Question (/thread-498.html)
Pages:
1
2
RE: Degree Finder or DRO Question - ScrapMetal - 06-18-2012
(06-18-2012, 02:02 PM)Highpower Wrote: I have heard of some folks that securely attached a cheap laser pointer to the head of their mill/drill pointing toward the farthest wall in the shop from the machine. With the mill head centered they would lay out a vertical line on the wall where the laser spot was.
After moving the head of the mill all they had to do was make sure the laser was still on the line. It sounds like a good idea to me, although I've never had to try it.
Others had said that they pointed the laser straight down at the base of the mill and made a mark there to reference to, but I think with the distance of going across the shop to the wall would be more accurate?
The greater the distance the more accuracy you would "potentially" have. I say potentially because you would run the risk of the machine moving in relation to the wall which would throw you off.
-Ron
RE: Degree Finder or DRO Question - Highpower - 06-18-2012
I suppose that is true. So how hard do you have to hit one of those when bumping into it, in order to move it anyway?
And the more important question.... how badly is it going to hurt?
RE: Degree Finder or DRO Question - November X-ray - 06-18-2012
A laser would work if you had a very stable base. For most of my equipment, I have everything on rollers. I was doing a little research and found something called a digital arc plotting indicator. Now if I can find out even more perhaps there is an affordable alternative that will work for my thoughts.
RE: Degree Finder or DRO Question - doubleboost - 06-18-2012
Hi
I had a Axminster mill drill a lazer pen was just cable tied to the head
This hit a wall 15 feet away it proved to be spot on
The machine was on a solid base
John
RE: Degree Finder or DRO Question - stevec - 06-19-2012
Amazing John, cable ties and precision in the same message.
Good job!
RE: Degree Finder or DRO Question - ScrapMetal - 06-19-2012
(06-19-2012, 06:45 AM)stevec Wrote: Amazing John, cable ties and precision in the same message.
Good job!
Definitely should look for a job at NASA.
-Ron