+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html)
+--- Thread: Belt Grinder (/thread-2710.html)
RE: Belt Grinder - DaveH - 06-06-2015
(06-06-2015, 10:48 AM)dallen Wrote: that sliding bar is like 1.25 X 1.25 or close to 32X32 MM.
Hope 3400 RPM motors are cheaper there then they are here.
The sliding bar is 1.5 x 1.5" .......... 38mm square, 35mm square should be OK.
Nothing is cheaper here than the US. ........ Well gold is
that's about all.
DaveH
RE: Belt Grinder - DaveH - 06-06-2015
Al,
I have seen the 'no weld grinder' and you are right it is ugly
although I have to say most of the belt grinders even the commercial ones wouldn't win a "pretty competition" Also commercial belt grinders use only a small amount of welding in their fabrication, whereas home built are mostly welded.I wouldn't just only sell the plans ... too easily copied. Selling kits (with the plans and instructions) is a better way to go (I think).
There are lots of hobbyist who don't want to build it themselves and lots that do.
Some won't mind a bit of welding, some won't want to weld.Catering for everyone can be difficult (if not impossible) but most guys like the idea of having a choice
.I shall definitely going the VFD route, makes it more versatile for stock removal, fine finish, deburring and for aluminium, steel and my favorite material of the month stainless steel. Of course it does up the cost some what.
DaveH
RE: Belt Grinder - DaveH - 06-06-2015
The 'No weld grinder sander' is from here http://www.usaknifemaker.com/plans-for-the-no-weld-grinder-sander-nearly-50-pages.html
The plans cost $25
DaveH
RE: Belt Grinder - Roadracer_Al - 06-07-2015
Yes, similar to Grinder in a Box, but with more sophisticated accessories, and more tool holding options.
Thanks for your feedback, Dave! I agree about the ease of copying. There needs to be hardware which adds value to the plans.
RE: Belt Grinder - Black Forest - 06-07-2015
Building your own belt grinder is not very hard actually. Here is a link to a bunch of different grinders.
http://www.cnccookbook.com/CCKnifeMakingGrinders.htm
RE: Belt Grinder - EdK - 06-07-2015
(06-07-2015, 01:21 PM)Black Forest Wrote: Building your own belt grinder is not very hard actually. Here is a link to a bunch of different grinders.
http://www.cnccookbook.com/CCKnifeMakingGrinders.htm
Thanks for the link. A lot of good ideas on that page.
Ed
RE: Belt Grinder - DaveH - 06-08-2015
For some reason I have found this belt grinder extremely frustrating - whether because I can't seem to find the material size I want or some other reason I don't know.
I'll buy one and grind something that will make me feel better
Shop #1. It will take about 4 weeks to make you one.
Shop #2. Sorry no stock should have stock end of July.
We do have stock of a self build one (promising I thought) but we don't have any 'wheels' for it. ........... When do you expect the wheels "don't know" ........... can't you ask your supplier "he doesn't know" Better off to make my own.
Now where is that guy aRM he's a knife grinder I'll ask him where he got his from. (This is the best idea I've had all week)
DaveH
RE: Belt Grinder - EdK - 06-08-2015
Dave,
Contact the guy that sells the grinder in a box. He says he ships international. It wouldn't hurt to get a quote from him.
http://www.polarbearforge.com/grinder_kit_order.html
Ed
RE: Belt Grinder - DaveH - 06-08-2015
Thanks Ed,
I have looked at it - just didn't take my fancy
DaveH
RE: Belt Grinder - DaveH - 06-09-2015
Even trying to make my own is getting tedious.
Asked Shop # 1 about contact wheels - only makes to order. How long "4 weeks"
everything takes 4 weeks with this guy. DaveH