+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html)
+--- Thread: 5 Cylinder Radial (/thread-2632.html)
RE: 5 Cylinder Radial - Brian - 02-26-2016
Hi Tom the material is marine grade stainless that has a tendency to work harden.it will be running against silversteel. followers. the loads are very light with only 2mm of lift
Brian.
RE: 5 Cylinder Radial - Brian - 04-04-2016
Another slide show just to keep you up to date.
https://youtu.be/O-DXol8hwzE
brian
RE: 5 Cylinder Radial - f350ca - 04-04-2016
Incredible work Brian. Keep posting!!!
RE: 5 Cylinder Radial - TomG - 04-04-2016
Thanks for keeping us updated, Brian. It's looking more like an engine with every post.
Tom
RE: 5 Cylinder Radial - Pete O - 04-04-2016
Fantastic. We're going to want video when you run it though!
RE: 5 Cylinder Radial - pepi - 04-05-2016
Brian,
Good stuff always enjoy seeing the progress of this build... the heads, valves and all are just tits.
Greg
RE: 5 Cylinder Radial - Brian - 04-05-2016
The latest info is that in a effort to lighten the cylinders I will be boring out a extra 1mm . this has nothing to do with increasing the capacity from 64cc to 69cc for extra performance you understand !!!!
Never was very good at telling porkies.
Brian
RE: 5 Cylinder Radial - Pete O - 04-06-2016
Without taking the time to look all the way back through this thread, I seem to remember you selected the bore size to work with an available piston ring from a chainsaw or something? Forgive me if I'm getting confused with another engine build.
RE: 5 Cylinder Radial - Brian - 04-07-2016
Hi Pete
That comment was made about the piston rings on the 32x40 horizontal engine , I am flattered that you even remember it . When I bought the rings for the 32x40 I found a supplier that seems to have rings of almost every size imaginable.
When starting the design of the radial I just thought 1" would be about right and 25 mm is very close as I want to work in metric. throughout the design I try to make .5mm as my finest measurement so you could almost build it using a good engineers scale or at best a cheep digital calliper.
This is what i like about doing my own design I am in the driving seat right or wrong.
Regards Brian.
RE: 5 Cylinder Radial - Brian - 05-01-2016
Most of the work I have been doing lately is reproducing the parts for the other 4 cylinders and cutting the fins on the top of the head and fitting the valves.
[attachment=13216]
[attachment=13217]
I have now started to make the camshafts and cam boxes. one of the cylinders has been bored out to the new size
and all seems to be OK so the others will be done as and when I find the time.
In the top photo the parts in front of the completed cylinder are the felt pad to lubricate the cams and its lid
Brian