|
A Boma
|
|
04-06-2015, 03:27 PM
Nice looking design Dave
 .I have to make one too , but mine will be some what different to yours  , anyway what CAD program are you using ? Rob Thanks given by: DaveH
04-06-2015, 04:12 PM
(04-06-2015, 03:27 PM)RobWilson. Wrote: anyway what CAD program are you using ? It was called Alibre ..... it's now called Cubify Design http://cubify.com/products/design How different ........... triangular   DaveH
04-06-2015, 04:34 PM
(04-06-2015, 04:12 PM)DaveH Wrote:(04-06-2015, 03:27 PM)RobWilson. Wrote: anyway what CAD program are you using ? Way way different Dave ,,,,,,,,,,,lets just say its not as classical a design as yours Rob
04-06-2015, 04:49 PM
Oh, ......... CAD program I'm wondering if you meant the 2D drawing. Still Cubify Design it does the 2D drawings automatically from the 3D model sketch.
DaveH
04-07-2015, 06:52 PM
Hi guys,
Well the scrolls have gone it's just too springy. So it will have have a half circle on the end. Something like this. Not too sure how I'm going to do it but has to be easier than the scrolls. DaveH
04-07-2015, 06:55 PM
Using hot rolled mild steel and painting it sure does look like a good idea
 DaveH 
04-07-2015, 07:08 PM
You could try annealing the SS. Bring it to a dull red heat, then bury it in sand or fiberglass insulation to cool as slowly as possible.
04-07-2015, 07:19 PM
I prefer the scrolls, change it back. :)
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
04-07-2015, 07:37 PM
I thought as it was only 3mm thick it would deform reasonably easy, it don't
 I spoke to a guy who does this "wrought iron" stuff - he suggested to heat it up (red) and do the scroll in one quick go. He said the knack to deforming stainless is to do it in one go and don't stop. DaveH
04-07-2015, 07:54 PM
I'm thinking of doing it in the 20 ton press - that should deform it.
It may need to have a round bottom, not flat as shown. Might work - I have no idea how I end up doing all these "daft" things. It will spring open quite a bit but I'll squash it in the vice DaveH |
|
« Next Oldest | Next Newest »
|
