Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
Dave,
I have the impression that the "flared" wedge would take MORE tonnage.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
The following 2 users Like stevec's post:
Highpower (01-20-2015), EdK (01-20-2015)
01-20-2015, 09:57 AM
(This post was last modified: 01-20-2015, 09:58 AM by stevec.)
Thanks Dave, now I remember
. How long I'll retain this is questionable though.
Steve
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Posts: 121
Threads: 4
Joined: Dec 2014
Location: Germany/Kandern
Without a wedge you are actually cutting the wood lengthwise. The wedge does take more power but if you have enough power the wedge will speed up the cycle time because you won't have to use as much of the stroke to "split" the wood. Firewood processors don't use a wedge because the next round will push the previous wood on through the splitting axe.
As you all have mentioned there will be some of the stringy types that require a longer stroke to finish the split.
Posts: 739
Threads: 35
Joined: Feb 2012
Location: Minneapolis, MN
01-20-2015, 05:17 PM
(This post was last modified: 01-20-2015, 05:18 PM by arvidj.)
BF, interesting observation about how the pro's do it.
They must cut the wood into pieces just a little shorter than the stroke of the splitter. Push a piece thru and if it splits then fine but if it hangs up on the wedge or cutter then when the cylinder retracts there is enough room for the next piece to go behind is and just carry on.
Of course this assumes that stroke length is the limiting factor and not stroke force.
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
Without a wedge the cutting edge would need to be longer than the wood diameter. With stringy wood you could push a 6 inch cutting edge though a 12 inch block and not break it open.
Free advice is worth exactly what you payed for it.
Greg
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
Greg, not to be contentious but I have split 24" dia. wood with my 11" tall wedge.
Admittedly that size is usually trunk area wood and free of knots.
Steve
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
01-21-2015, 09:43 AM
(This post was last modified: 01-21-2015, 09:43 AM by f350ca.)
I borrowed my friends gas powered splitter yesterday, and him for added labour. Even with its cast wedge (guess its about 2-3 inches wide) there were a few poplar that wouldn't split through. That wedge is about 6 inches tall with a neat feature, the cutting edge is angled slightly so that the top contacts first, would help hold the block down as it splits.
Free advice is worth exactly what you payed for it.
Greg
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
Greg, What sorta tonnage does your friends splitter develop? The poplar we have here splits if you look at it harshly.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
This is frozen right now, doesn't even saw great. The splitter goes through it easily just stringy.
Free advice is worth exactly what you payed for it.
Greg