Posts: 3,799
Threads: 184
Joined: Jun 2012
Location: Farmington Hills, Michigan
(10-08-2013, 02:57 AM)awemawson Wrote: The Interact literally 'fell off a lorry' when moving here and was a total write off.
I thought I was the only one to have experienced that dreadful feeling. During a move in one of the shops I used to work at, the movers literally "lost" a South Bend lathe driving to the new location. They went back and found what was left of it along the road. Machines were never meant to be put on a truck, or handled by incompetent movers.
The lathe didn't belong to me, but it was still a painful experience just the same. 
Tom
Posts: 4,683
Threads: 93
Joined: Feb 2012
Location: Perth, Australia
The following 1 user Likes Mayhem's post:
EdK (10-08-2013)
10-08-2013, 09:34 AM
(This post was last modified: 10-08-2013, 09:34 AM by Mayhem.)
Ed - we need a bigger one of these for this thread:
That is some serious and very nice equipment you have there Andrew. I had been following your CNC thread on MM and it is amazing what goes into making them work.
So what is the plan for the robotic arm? Personally, I'd have it set up to get me a beer from the fridge and open it for me. Or to answer my phone, as my wife always calls me when I'm under a car, in the middle of a cut or when my hands are covered in grease!
Hunting American dentists since 2015.
Posts: 2,344
Threads: 53
Joined: Feb 2012
Location: Spencer MA USA
Amazingly well-equipped shop for an electrical guy....envious I am!
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Not only am I suffering from "Machine Envy," I think I am now in "Machine Depression" 
DaveH
Posts: 642
Threads: 14
Joined: Oct 2013
Location: East Sussex, UK
10-08-2013, 12:08 PM
(This post was last modified: 10-08-2013, 12:09 PM by awemawson.)
(10-08-2013, 09:34 AM)Mayhem Wrote: Ed - we need a bigger one of these for this thread:
That is some serious and very nice equipment you have there Andrew. I had been following your CNC thread on MM and it is amazing what goes into making them work.
So what is the plan for the robotic arm? Personally, I'd have it set up to get me a beer from the fridge and open it for me. Or to answer my phone, as my wife always calls me when I'm under a car, in the middle of a cut or when my hands are covered in grease!
Well Mayhen - it came as a freebie with the Beaver Partsmaster. I have an idea in the back of my head to have it holding my Hypertherm 900 plasma cutter in it's hand and cut profiles in plate steel. It only needs 2 dimensions for that but it probably takes up less space than a cnc gantry type plasma table. It's not top of the 'roundtuit' list by quite a way at the moment. Being an 'Arcmaster' it is proof against the interference of the arcing inherent in these things.
Andrew Mawson, proud to be a member of MetalworkingFun Forum since Oct 2013.
Posts: 251
Threads: 21
Joined: Jun 2013
Location: Shiloh, Il. USA
Nice stuff Andrew! Welcome!
induction furnace? boy I was on the trail of one many years ago, when you have time expand our knowledge here by a tour of it's operation! my "hotshop" is way under powered electrically.
oldgoaly, proud to be a member of MetalworkingFun Forum since Jun 2013.
Posts: 642
Threads: 14
Joined: Oct 2013
Location: East Sussex, UK
The following 2 users Like awemawson's post:
oldgoaly (10-09-2013), DaveH (10-09-2013)
Posts: 642
Threads: 14
Joined: Oct 2013
Location: East Sussex, UK
The following 2 users Like awemawson's post:
oldgoaly (10-09-2013), DaveH (10-09-2013)
10-09-2013, 03:33 PM
(This post was last modified: 10-09-2013, 03:36 PM by awemawson.)
It takes in 415V AC three phase, rectifies it, and chops it at a frequency determined by the resonant frequency of it's internal bank of capacitors, and the external coil that is wrapped around the crucible. The blue box is connected to the furnace body by four 3/4" heavy wall rubber pipes that have very thick stranded copper (actually welding) cable passing up them. Coolant passes though the pipes, round the coil in the furnace (which is copper tube) and through the components of the blue electronics cabinet. I also have a 15kW chiller to keep this coolant below critical temperature. The coolant is the 'food grade' ethanol glycol.
It was working splendidly before I moved but has been in storage for the last six years so I hope it still works. No doubt there will be teething troubles. The circulating currents in the water cooled cables are measured in thousands of amps 
I used to run it off a 100 kVA generator but here I've had a 160 amp per phase 415v three phase supply laid on so can hopefully run it off the mains. I was measuring 150 amps per phase off the poor old generator at the last place for short periods 
Andrew Mawson, proud to be a member of MetalworkingFun Forum since Oct 2013.
Posts: 1,459
Threads: 159
Joined: Feb 2012
Location: Northern England
Posts: 642
Threads: 14
Joined: Oct 2013
Location: East Sussex, UK
The following 2 users Like awemawson's post:
oldgoaly (10-09-2013), PixMan (10-13-2013)
Andrew Mawson, proud to be a member of MetalworkingFun Forum since Oct 2013.
|
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)
